Okuma's large arbor design gives faster line retrieval for a single action reel. traditionally known as a specialty reel, large arbor reels have been fished by the specialists. With the introduction of the integrity, Okuma opens up to the world of large arbor fishing. The Integrity series features a uniquely patented, oversized stainless steel-based disc drag. This amazing drag has little to no initial resistance, with incredible high-end drag pressure. The drag is controlled by an oversized roller bearing, allowing for drag free retrievals.
ALC : AlumiLite construction incorporates Okuma's new aluminum body. Aluminum frames are very rigid and can withstand tremendous amounts of pressure and torque. These frames also provide for precise tolerances between moving parts for ultimate smoothness and durability.
Drag Free Retrieval : The Drag Free Retrieval system allows anglers to crank freely with no resistance by utilizing our corrosion resistant stainless steel roller bearing. This is a one-way roller bearing so the spool is only engaged in one direction. As soon as you spin the handle backwards you have instant drag engagement. By reversing this bearing in the spool, you can quickly change the handle retrieve direction.
Rulidium : This proprietary drag material offers a wide range in drag adjustment with precise high and low settings. These super smooth Rulidium washers reduce heat and friction for maximum performance.
Model
Width
Diameter
Weight
Line Weight
Backing Capacity
I10/11
30mm
99mm
9.5oz
10
220+ yards of 20lb.
11
220- yards of 20lb.
Features
Large arbor spool for high-speed retrieves
One way clutch stainless steel ball bearing
Itegral one way, Rulidium disc drag
Precision die cast aluminum frame and spool
Exposed rim for added drag control
Stainless steel main shaft
Retrieve Information
If you cast with your right hand and retrieve with your left hand then you want Left Hand Retrieve.
If you cast with your left hand and retrieve with your right hand then you want Right Hand Retrieve.
Note: Some prefer to use the same hand for casting and retrieving by setting the hook before switching the rod to the opposite hand. This is perfectly acceptable. The important thing is that you retrieve with the hand with which you are most comfortable (fastest retrieve).
Backing Material Information
We will put 20# test Dacron backing material by 3M-Scientific Anglers on to your reel.
Be sure to select your retrieve (see above).
Standard Backing is built with advanced 3M technology that allows 3M to create small diameter backing without losing the inherent strength of the backing material.
Features:
Exceptionally thin material for more reel capacity
Low coefficient of friction minimizes wear on guides
High abrasion resistance
Colorfast
Extremely high visibility
Optional Spey Lines for this Rod
WindCutter® Spey Line
more info
The WindCutter is a spey line with a short, easy-loading head between 48 ft - 60 ft. It is the best choice of line for those learning to spey cast and for the angler who likes to shoot line to get distance.
Weight
30 Ft Weight
Running Line
Rear Taper
Body
Middle Taper
Body 2 Length
Front Taper
Tip
Tensile Strength
WWF7/8/9F
525 gr (34.0 gm)
Recommended for Advanced Spey Casters on this Rod
65' (19.8 m)
3' (0.9 m)
20' (6.1 m)
15' (4.6 m)
12' (3.7 m)
4.5' (1.4 m)
.5' (0.2 m)
25 lb. (11.4 kg)
55' (16.8 m)
120' (36.6 m)
WWF8/9/10F
585 gr (37.9 gm)
Recommended for Novice Spey Casters on this Rod
70' (21.3 m)
3' (0.9 m)
20' (6.1 m)
15' (4.6 m)
12' (3.7 m)
4.5' (1.4 m)
.5' (0.2 m)
25 lb. (11.4 kg)
55' (16.8 m)
125' (38.1 m)
Yellow 54'6" Head 130' Line
Beginning Spey Casting Booklet Included
Longer head length to enable the spey cast to “anchor” easily
Green high-floating running line
WindCutter® Interchangeable Tips Spey Line
more info
This line is the same profile and taper as the WindCutter spey line, but with two floating and five sinking tips for a multi-purpose, multi-application spey line.
The complete design includes the shooting line and body with stiff, non-hinging loops, a 15 ft middle tip section with two loops (Tip 2), and a 15 ft front floating tip (Tip 1) for light fly presentation.
The 15 ft tapered sinking tips included are a clear AquaLux Intermediate Tip (1.5 ips 3.7 cm/s), a Type 3 (3 ips 7.62 cm/s) Density Compensated Tip, a Type 6 (6 ips 15.2 cm/s) Density Compensated Tip and a Type 8 (8 ips 20.3 cm/s) Density Compensated Tip.
Also included is the new Sink Tip Compensator Tip, an Intermediate Tip 2. Simply replace the Floating Tip 2 with this new tip when fishing the 15 ft sink tips to get better depth control.
The line also includes a shooting head wallet to store tips.
Weight
30 Ft Weight
Running Line
Rear Taper
Body
Middle Taper
Body 2 Length
Front Taper
Tip
Tensile Strength
WWF7/8/9 TIPS
525 gr (34.0 gm)
Recommended for Advanced Spey Casters on this Rod
65' (19.8 m)
3' (0.9 m)
20' (6.1 m)
15' (4.6 m)
12' (3.7 m)
4.5' (1.4 m)
.5' (0.2 m)
25 lb. (11.4 kg)
55' (16.8 m)
120' (36.6 m)
WWF8/9/10 TIPS
585 gr (37.9 gm)
Recommended for Novice Spey Casters on this Rod
70' (21.3 m)
3' (0.9 m)
20' (6.1 m)
15' (4.6 m)
12' (3.7 m)
4.5' (1.4 m)
.5' (0.2 m)
25 lb. (11.4 kg)
55' (16.8 m)
125' (38.1 m)
Yellow 54'6" Head 130' Line
Beginning Spey Casting Booklet Included
5 Interchangeable Tip Sections (Tip 1)
15 ft middle tip section (Tip 2)
10 possible line configurations
Longer head length to enable the spey cast to “anchor” easily
Green high-floating running line
Includes a shooting head wallet to store tips
Optional Tapered Leaders Optional Free Leader
10 lb. 9 ft. Monofilament Tapered Leader
RIO Monofilament Leaders
Test Weight
8.8 lb. (4 kg)
10 lb. (4.5 kg)
10 lb. (4.5 kg)
13.2 lb. (6 kg)
13.2 lb. (6 kg)
Length
10 ft (3 m)
10 ft (3 m)
12 ft (3.7 m)
10 ft (3 m)
12 ft (3.7 m)
Butt Diameter
.027" (0.686 mm)
.027" (0.686 mm)
.027" (0.686 mm)
.027" (0.686 mm)
.028" (0.711 mm)
Tip Diameter
.011" (0.279 mm)
.012" (0.305 mm)
.012" (0.305 mm)
.014" (0.356 mm)
.015" (0.381 mm)
Recommended Hook Size
4–10
2–8
2–8
1/0–6
1/0–6
Great abrasion resistance
The world's only IGFA Class tippet in knotless leader
Thick butt to turnover big flies and counter in wind conditions
High knot and tensile strength
Light gray color is the most neutral and integrates visually with any background for the perfect camouflage
RIO knotless leaders have a high tech "best maximum pull" ratio to orient the molecules in a linear chain. This means that RIO's leaders return to their original taper after a fight
RIO Fluorocarbon Leaders
When stealth and accurate presentations are required for wary fish, the RIO Fluoroflex Knotless Tapered Leader is the leader of choice. The leaders are nearly invisible and feature superb knot strength, and abrasion resistance. In the tradition of RIO, the leader tapers are designed and extruded to exacting tolerances. Since Fluorocarbon is denser than nylon, the Fluorflex leaders will sink faster than traditional nylon leaders.
These leaders are a good choice for fishing chironomids and emergers in lakes.
Size
2X
1X
0X
Test Weight
8 lb. (3.6 kg)
10 lb. (4.5 kg)
12 lb. (5.5 kg)
Length
9 ft (2.74 m)
9 ft (2.74 m)
9 ft (2.74 m)
Butt Diameter
.0.024" (.610 mm)
.0.026" (.660 mm)
.0.026" (.660 mm)
Tippet Diameter
.0.009" (.229 mm)
.0.010" (.254 mm)
.0.011" (.279 mm)
100% fluorocarbon
Low visibility - virtually invisible under water
High abrasion-resistance
Excellent knot strength
Extremely supple
Great strength to diameter ratio
Long butt section that will turn over flies effortlessly
Jim Teeny (2 Pack) Spey Leaders
10lb. 15ft. Spey Line Leaders (2 per pack) by Jim Teeny
When conditions demand a low visibility leader to encourage more strikes. First choice for Spey lines.
Test Weight
10 lb. (4.5 kg)
Length
15 ft (4.5 m)
The 7-8 Weight:
Designed for very large trout and large bass as well as some saltwater species
Used for pitching large streamers and large flies
Longer casts are excellent
Not the best for short casts
Great For:
Large Trout
Smallmouth Bass
Largemouth Bass
Northern Pike
Muskie
Steelhead
Light Salmon
Bonefish
Sea Trout
Small Striped Bass
Redfish
Snook
Wide Rivers & Lakes
Flats
Weight Class
Actual Line Weight (gr.)
Allowable Variation (gr.±)
7 wt
185 gr.
8
8 wt
210 gr.
8
Standardized line weights as defined by the American Sportfishing Association (ASA, formerly AFTMA).
Weights are given in grains (7000 grains/pound or 437 1/2 grains/ounce), measured by weighing the front 30 feet of the fly line.
TFO's No-Fault Rod Warranty is for the life of the original registered owner. Promptly fill out and send TFO the attached registration card to activate your warranty registration. In the event you break your rod, simply send it with $25 for shipping and handling to TFO (address below) and they will immediately repair or replace your rod.
Blanks sections (as appropriate on custom built rods) will be replaced and returned with related hardware and finishings from broken sections. This warranty is limited to the blank, on custom rods using TFO blanks.
Send Warranty Card or Damaged Rods to:
Temple Fork Outfitters, Inc.
8115 Sovereign Row
Dallas, TX 75247
Yellow 54'6" Head 130' Line
